Barra Cruach Dhosmálta 15-5PH, Pláta & Bileog don chustaiméir
Mar 16, 2026
Fág nóta
| Caighdeán | AMS 5659, AMS 5823, AMS 5862, ASTM A564 / A564M, ASTM A693 |
|---|---|
| Grád | 0Cr15Ni5Cu4Nb, 1.4545, S15500 |
| Fad | 1000 mm-6000 mm (39.37-236.22 in), Saincheaptha |
| Trastomhas | Barra: 6 mm-300 mm (0.24-12 in), Saincheaptha |
| Tinneas | Saincheaptha, Pláta: 6 mm-100 mm (0.24-3.94 in), Bileog: 0.5 mm-6 mm (0.02-0.24 in) |
| Leithead Iomlán | Saincheaptha, Bileog & Pláta: 1000 mm-2000 mm (39.37-78.74 in) |
| Críochnaigh Dromchla | 2B, 2D, BA, Brataithe, srl., Talamh, Muileann, Uimh.1, Uimh.4, scafa, snasta, iompú |
| Foirm | 15-Barra brionnaithe 5PH, 15-Pláta 5PH, pláta snasta 15-5PH, bileog 15-5PH, Bileog tempered 15-5PH, Coil, Barra Fuar Tarraingthe, Pláta Fuarrollta, srl., Barra Maol, Bileog te-rollta, Barra dronuilleogach, Slat, Barra Babhta, Barra Cearnóg |
Comhdhúile Ceimiceacha
| Cróimiam (Cr) | Nicil (Ni) | Copar (Cu) | Mangainéis (Mn) | sileacain (Si) | Carbón (C) | Fosfar (P) | Sulfar (S) | Nítrigin (N) |
|---|
| 14.0 – 15.5 | 3.5 – 5.5 | 2.5 – 4.5 | 1.0 max | 1.0 max | 0.07 max | 0.04 uas | 0.03 max | 0.10 max |
Airíonna Meicniúla
| Airíonna | Aonad Méadrach | Aonad Impiriúil |
|---|
| Neart Teanntachta | 1000-1170 MPa | 145-170 ksi |
| Neart Toradh | ≥ 1000 MPa | ≥ 145 ks |
| Cruas Vickers | 360 HV (tipiciúil) | 360 HV (tipiciúil) |
| Cruas Brinell | 350 HB (tipiciúil) | 350 HB (tipiciúil) |
| Cruas Rockwell | 35 HRC (tipiciúil) | 35 HRC (tipiciúil) |
| Fadú | ≥ 10% | ≥ 10% |
| Modal Leaisteacha | 200 GPa | 29.0 x 10³ ksi |
Glaoigh Linn